Service hotline
+86 0755-83975897
Release date:2021-12-28Author source:KinghelmViews:1516
The Wassenaar agreement on export control of conventional arms and dual-use goods and technologies, an agreement on export control of cutting-edge technologies and equipment to restrict and suppress the scientific and technological development of non member states, especially China, is dominated and controlled by the United States.
The Wassenaar agreement is also known as the Wassenaar Arrangement mechanism. With the disintegration of the former Soviet Union in 1991, the "Paris Coordinating Committee" (hereinafter referred to as "Batumi") was officially dissolved on April 1, 1994. After the end of the cold war, under the manipulation of the United States, in July 1996, 33 countries dominated by western countries (including Japan, the European Union and Canada, and the European Union has expanded to more than 33 countries) signed the Wassenaar Arrangement, and decided to implement the new control list and information exchange rules from November 1, 1996.
Like Batumi, Waxie also contains two control lists: one is the list of dual-use goods and technologies, covering nine categories: advanced materials, material processing, electronic devices, computers, telecommunications and information security, sensing and lasers, navigation and avionics, ships and maritime equipment, propulsion systems, etc; The other is the list of military products, covering 22 categories of weapons, ammunition, equipment and combat platforms.
The import and export of high-end RF and microwave measuring instruments are controlled by Wassenaar agreement. For the specific control list, see the commercial control list (CCL) issued by the U.S. Department of Commerce.
signal source
Signal source - narrow pulse modulation
|
Signal source wideband vector I / Q modulation
|
Signal source frequency agility
|
Signal source - ultra low phase noise
|
Signal source - carrier frequency 43.5 to 90GHz
|
Signal source - millimeter wave signal source
|
Signal analyzer
The frequency covers 31.8 to 37ghz, and the resolution bandwidth RBW > 40MHz |
The frequency covers 43.5 ~ 90GHz and displays the average noise level DANL < - 150dbm / Hz |
Frequency over 90GHz |
The real-time bandwidth exceeds 170mhz, and the 100% interception time is no more than 15 minutes μ s. Or the 100% interception time of FMT triggered by frequency template shall not be greater than 15 minutes μ s |
network analyzer
Frequency over 110ghz |
The output power at 43.5 to 90GHz exceeds 15dBm |
The output power at 90 to 110ghz exceeds 0dbm |
Nonlinear analysis function at 50 to 110ghz |
The built-in signal source and receiver of network analyzer and their frequency expansion are also limited by relevant instrument rules |
Receiver
The operating frequency exceeds 110ghz, and the amplitude and phase can be measured at the same time.The receiver of vector network analyzer and its frequency expansion are also limited by this provision. |
Solid state power amplifier
Frequency 2.7ghz < f ≤ 2.9ghz, power P > 75W |
Frequency 2.9ghz < f ≤ 3.2ghz, power P > 55W |
Frequency 3.2ghz < f ≤ 3.7GHz, power P > 40W |
Frequency 3.7GHz < f ≤ 6.8ghz, power P > 20W |
Frequency 6.8ghz < f ≤ 8.5ghz, power P > 10W |
Frequency 8.5ghz < f ≤ 16ghz, power P > 5W |
Frequency 16ghz < f ≤ 31.8ghz, power P > 3W |
Frequency 31.8ghz < f ≤ 37ghz, power P > 0.1nw (- 70dBm) |
Frequency 37ghz < f ≤ 43.5ghz, power P > 1W |
Frequency 43.5ghz < f ≤ 75ghz, power P > 31.62 MW (15 DBM) |
Frequency 75ghz < f ≤ 90GHz, power P > 10 MW (10 DBM) |
Frequency f > 90GHz, power P > 0.1nw (- 70dBm) |
Harmonic mixer
Used for frequency expansion of signal source or signal analyzer, exceeding 90GHz |
The working frequency index of the frequency expansion module of the signal source (including the signal source in the network analyzer) shall not exceed 90GHz, but it can work over the range above 90GHz, and the output power exceeds - 70dBm |
It is used for signal source frequency expansion, with frequency of 43.5 to 90GHz and output power of more than 20dbm at any frequency |
For network analyzer frequency expansion, more than 110ghz |
It is used for frequency expansion of network analyzer, with frequency of 43.5 to 90GHz and output power of more than 15dBm |
It is used for frequency expansion of network analyzer, with frequency of 90 to 110ghz and output power of more than 0dbm |
It is used to test the frequency expansion of the receiver, exceeding 110ghz |
other
TACAN signal analysis |
Information security measurement receiver |
Copyright © Shenzhen Kinghelm Electronics Co., Ltd. all rights reservedYue ICP Bei No. 17113853